Primer and antirust paint for surface of black metal in light or middle-degree corrosive industrial situations, unsuitable for the position under the water.

Properties: Good antirust, quick drying, and excellent adhesion

Physical Parameter: Color: Tangerine, mat gloss
Density: Approx. 1.90 kg/L
Film Thickness: WFT: 75μ M DFT: 40μ M
Theoretic Dosage: 0.15 kg/m2
Flash Point: 38º C
Drying Time: 23º C, Dust-Free: ≤ 4 h, Hard Drying: ≤ 24 h
Storage: 1 year

Application Parameter: Formula Ratio: One pot
Curing Time: Use after being opened and fully stirred
Pot Life: Infinite
Coating Method: Hand brushing, roll coating, unsuitable for spraying,
Diluent/ Dilution Ratio: Diluent for 104 alkyd resin coatings, <5%
Surface Treatment: Sand blasting till qualified to SA 2.5 or hand rubbing till qualified to St3, secondary rust removing must be made on surface of shop primer till qualified to St3.
Pre- Coat Accessory Coatings: All kinds of shop primer or directly coating on surface of derusted steel.
Post-Coat Accessory Coatings: Alkyd resin coatings
Coating Interval: 23º C, Min. 8 h; Max. 4 d
Note: Please convert the tank for a day or two before using because red lead powder has biggish proportion, and fully stir after open the tank. Not to be used directly on zinc or aluminum board.

Claim: The data in this Specification is derived from experiments and practical applications, and can be regarded as a guide for application. The title product is only for specialty application. Otherwise we only guarantee the quality of the said coating itself if it is used in other sectors undescribed herein or fresh sectors.